KVH Industries TracVision R4 Manuel d'utilisateur télécharger pdf (Page 28)

2. If you are using HyperTerminal, open

HyperTerminal and establish the following

settings:

• Bits per second: 9600

• Data bits: 8

• Parity: None

• Stop bits: 1

• Flow control: None

If you are using the KVH Flash Update Wizard,

double-click the “KVH Flash Update Wizard”

shortcut on your computer’s desktop to start the

wizard. Then go to the “Select board to flash”

screen.

You do not need to flash the antenna to

configure the satellites; you will simply enter

commands in the “Command” box.

3. Apply power to the TracV

ision R5/R4 system and

allow the system to complete full initialization.

Data should be scr

olling on the PC display to

identify any system pr

oblems detected. If no data

is seen, r

echeck your connections and the terminal

software setup.

Installing the Satellite of Choice from the Satellite Library

Once the data connection has been made between the PC and the

TracV

ision R5/R4, you must assign the satellites you wish to

have in the satellite pair by typing the following commands.

(If

you ar

e using HyperTerminal, type the commands in the

HyperTerminal window. If you are using the KVH Flash Update

izard, type the commands in the “Command” box.)

ype

HAL

and pr

ess Enter to place the antenna in

Idle Mode.

2. Select which preprogrammed satellites you wish

to assign. Table 2-5 lists the satellite names that are

in the preprogrammed North American and

European satellite library.

2-17

Installation

54-0157 Re

Satellite Install Name

North American Satellites

DSS 101ºW DSS_101

DSS 119ºW DSS_119

EchoStar 61ºW Echo_61

EchoStar 110ºW Echo_110

EchoStar 119ºW Echo_119

EchoStar 148ºW Echo_148

ExpressVu Expressvu

ExpressTV ExpressTV

European Satellites

ASTRA1 19.2ºE ASTRA1

ASTRA2N 28.2ºE

ASTRA2N

ASTRA2S 28.2ºE ASTRA2S

Hispasat 30.0ºW HISPASAT

Hotbird 13.0ºE HOTBIRD

Sirius 5.0ºE SIRIUS

Thor 0.8ºW THOR

Other Installation Designations

User-defined 1 USER1*

User-defined 2 USER2*

None None

* USER1 and USER2 will only be

available if one or two user-defined

satellites have been added to the

library as detailed in

Section 2.5.2,

“Prog

ramming User-defined Satellites.”

Table 2-5

Satellite Installation Names

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 64 65

Commentaires sur ces manuels

Pas de commentaire

KVH Industries TracVision R4 Manuel d'utilisateur Page 28

Commentaires sur ces manuels